19
Two beeps are heard. The setting is saved and the UPS returns
to normal operation.
§
§
3
3
.
.
1
1
6
6
R
R
e
e
s
s
e
e
t
t
t
t
i
i
n
n
g
g
B
B
a
a
t
t
t
t
e
e
r
r
y
y
I
I
n
n
f
f
o
o
r
r
m
m
a
a
t
t
i
i
o
o
n
n
①
Check that the UPS is in the following condition.
②
Press and hold
for 3 or 4 seconds. Then release it when two beeps are heard.
③
Quickly press
(within 3 seconds) several times to set the 5 LEDs surrounded by in the figure
below to a blinking pattern such as the one in the figure.
④
Quickly press
(within 3 seconds) several times to switch to the setting value LED blinking pattern
to select for the 4 LEDs surrounded by
in the figure below.
⑤
Press and hold
for 3 or 4 seconds.
Then release it when two beeps are heard.
LEDs that blink when the “Reset” setting is selected.
Setting
Setting LED
Description
Do not reset
●
○
○
○
Do not reset.
Reset
○
●
○
○
Reset the battery information.
Reset the battery information (remaining life, accumulated
battery operating time, number of power outages, battery
exhaustion LED indicator), when you replace the battery.
Default
setting
The blinking pattern changes each time you press
or
.
If you miss the LED blinking pattern you want to select, continue pressing
the button repeatedly until the LED blinking pattern is redisplayed.
Tip
The battery information should be reset when the
battery is replaced. If resetting is performed
accidentally, the alarm of the remaining battery
service life is not emitted correctly.
MAIN SW on the back panel set to “ON” *1
The “Green INV.ON/STAND BY” and
the “Green OUTPUT are not blinking. *2
*1. Operation is possible regardless of whether
is ON or OFF.
*2. If these LEDs are blinking, Forced Bypass switch
may be set to “Bypass”. Set this switch to “Inverter”,
and restart the UPS.
Tip
The UPS switches to the user setting mode.
Buzzer sounds : 2 beeps
：
Either BATT.LOW or 25
blinks,
or both
BATT.LOW and 25
blink.
：
INPUT blinks.
：
LED is off.
：
LED is blinking.
Press
Press
Hold for 3 or 4 sec.
until 2 beeps.
Hold for 3 or 4 sec.
until 2 beeps.
