Sanyo Denki A11F102 Series, Руководство пользователя

Страница: 8 / 11

- 6 -
0 1 2
0 1 2
Mode verification and setting modification
(1) Start the UPS
Operating mode verification and setting changes are done using the operating unit
and the display of the UPS front panel. Begin by starting the UPS.
Follow the procedures for startup operation as described in the UPS Instruction
Manual.
(2) Verify the operating mode and modify settings using the operating unit and
the display
Verify the operating mode and modify settings
following the procedures described in the UPS
Instruction Manual.
(3) Disable the Automatic startup
Verify and change settings following the
procedures described in the UPS Instruction
Manual.
For more information about the ring signal
startup, refer to "§6 Special Functions" of this
manual.
Fig. 4-1 LED display when standalone mode is selected
Caution:
When the UPS starts, power will be supplied from the outlet.
It is recommended to disconnect the load devices before starting the UPS.
● －
Blinking
○ －
Off
● －
Blinking
○ －
Off
Fig. 4-2 LED display when the ring signal is set to “Disabled”