-
5
-
4. UPS Settings
（
A11F series
）
There are two communication mode settings for the UPS.
•
Standalone mode
•
W/S mode (Workstation mode)
Set the UPS to Standalone mode when using this Card.
Follow the procedures described on pages 6
～
7 to verify and change the UPS
mode settings.
Note that if the card was factory preinstalled, this step is unnecessary.
Caution:
If the UPS is set to W/S mode, the Interface Card cannot be used.
Also, this card cannot be used with power control software (SANUPS SOFTWARE)
that requires a PC I/F connector for serial connection. If PC shutdown capability is
required while using this Card, the communication settings in the power control
software must be set to “Contact Connection”.
