SANY SY16C, Руководство по эксплуатации и обслуживанию, Страница: 107 / 208

SY16C Excavator OMM Machine Operation
SANY
Operation and Maintenance Manual — 0420
4-35
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
TRAVEL
General Travel Instructions
• The machine’s travel direction is controlled by the
travel control levers/pedals and dictated by the location
of the travel motors relative to the canopy.
• When the travel motors (1) are positioned behind the canopy, press the top of the travel control pedals or push
the travel control levers to move the machine forward.
• Select a flat travel surface and travel in a straight line. If possible, turn the machine slowly and gradually.
• Never let the machine make contact with power lines
or bridges (2).
• Do not drive or swing the machine on broken stones,
rugged surfaces, steel bars, or scrap iron. This could
cause personal injury or track damage.
• Do not perform operations where the rubber tracks
may skid. This can cause early track wear.
• Slow the machine when traveling on uneven ground. A
lower speed reduces the possibility of machine
damage.
CAUTION!
Appoint a signalman when driving or operating
the machine in confined areas. Use standard
hand signals before starting the machine.
Failure to follow this caution could result in
injury.
Fig. 4-48 0002878
1
Fig. 4-49 0002880
2
Fig. 4-50
0002882