SANY SY155U Скачать руководство пользователя страница 58

Страница: 58 / 192

3-28

MACHINE CONTROLS

SY155U Excavator OMM

Home Screen Functions

0003700

Figure 3-45

NOTE:

Icons are displayed above the function buttons



F1 – F5 and change when a menu option is
selected.

Home screen icons and function buttons:

• F1 button – not functional on this screen. Icon for

this button displays either a fan (shown), indicating
the climate control system is in ventilation-only
mode, or a snowflake icon, indicating the climate
control system is on.

• F2 button – opens the Tool Select screen. The icon

for this button displays the current work tool
selection (bucket, breaker, shear, or quick coupler).
See “Tool Select Screen” on page 3-28.

• F3 button – opens the Quick Coupler screen. The

icon for this button displays the current status of the
quick coupler. See “Quick Coupler Screen” on
page 3-29.

• F4 button – displays the output from the rearview

camera.

• F5 button – opens the Main Menu screen.

Work Accessory Selection

Tool Select Screen

0003697

Figure 3-46

Press F2 from the home screen to display the Tool Select
screen with the following options:

• Bucket

• Breaker

• Shear

• Quick Coupler

1. Press the F1 button below the down arrow icon (1) to

scroll through tool options.

2. Press the F3 button below the check mark icon (2) to

select the tool to operate.

3. Press the F5 button below the return arrow icon (3) to

return to the previous screen.

NOTE:

On the home screen, the selected tool icon is
displayed above the F2 button.

NOTE:

You can also access the Tool Select screen from
the Main Menu. See “Main Menu Screen” on
page 3-30.

Содержание SY155U

































































































































































































Результаты поиска

Содержание SY155U

Отзывы:

SANY SY155U, Руководство по эксплуатации и обслуживанию, Страница: 58 / 192

Результаты поиска

Содержание SY155U

Отзывы: