SANY SY155U, Руководство по эксплуатации и обслуживанию, Страница: 37 / 192

MACHINE CONTROLS
3-7 SY155U Excavator OMM
NOTE: The track frame is facing forward when the drive
sprocket is to the rear of the operator. All travel
controls are reversed when the machine is facing
rearward (travel sprocket is forward of operator).
The travel control levers (3) or pedals (4) are used to
change the machine’s traveling direction.
• Forward travel: Push the control levers or pedals
forward (1).
• Backward travel: Pull the control levers backward
(2).
• Neutral position (N): The machine stops.
NOTE: The footrests (5) are not control devices.
Left Console
0003670
Figure 3-6
The left console contains the left joystick (1) and climate
control panel (2). For additional information on the left
joystick, see “Left Joystick” on page 3-8. For the climate
control panel, see “Climate Control Panel” on page 3-20.
Right Console
0003669
Figure 3-7
The right control console contains the right joystick (1),
dozer blade control lever (2), throttle control dial (3),
windshield washer switch (4), windshield wiper switch
(5), and the key switch (6).
Dozer Blade Control Lever
0003635
Figure 3-1
The dozer blade control lever (1) is on the right side of
the operator seat:
• Move the lever forward (2) to lower the dozer blade.
• Move the lever backward (3) to raise the dozer
blade.
NOTE: When the dozer blade control lever is released, it
will return to the neutral position.
Throttle Control Dial
0003635
Figure 3-8
The throttle control dial (1) is used to adjust the engine
speed. Turn the dial clockwise to increase engine speed.
Turn the dial counterclockwise to decrease engine
speed:
• MIN (low idle): Turn the throttle control dial fully
counterclockwise.
• MAX (high idle): Turn the throttle control dial fully
clockwise.
NOTE: The throttle control dial position is displayed on
the monitor home screen. See “Home Screen” on
page 3-24.
1
2
6
4
2
5
3
1
2
3
1
1