A
B
C
D
E
F
G
H
I
J
3
Instruction Manual for Sanuvair
®
S300
1-888-726-8869
www.sanuvox.com
ABOUT THE PRODUCT
The Sanuvair
®
S300 is designed to help reduce airborne bacterias, viruses, as well as odors caused by mold and fungus that
pass through the unit. The UV dose used stops the microbial growth in the air flowing through that unit. The actual percentage
of efficiency depends on the velocity of the air and the pollutant treated.
For information or recommendations on how to size your specific application, please call SANUVOX at 1-888-726-8869.
COMPONENTS
How it Works
The Sanuvair
®
S300 is comprised of a ventilator, speed selection switch, two stage of filtration and the cabinet enclosure. The
ventilator pulls air through the prefilter and pushes the same air through the HEPA filter which helps reduce 99.97% of particles
that are 0.3 microns or larger in size.
A. Lamp & Ballast Access Door
(Plate must be installed once lamp setup are done.)
B. LED Status Display
C. Filters and Motor Access Door
D. Door Latch
E. Prefilter
F. Motor
G. Door Interlock Switch
H. Speed Selection Switch
I. HEPA Filter
J. Power Cord Connector (on the side)
ACCESSORIES & KITS
The following optional accessories and/or kits work great with your product (sold separately).
Air Inlet / Outlet Grid(s)
Accessories made to facilitate Sanuvair
®
S300 stand-alone
installation.
8" Collar(s)
Accessories made to facilitate Sanuvair
®
S300 added duct
installation.
For instruction manuals or information about your optional accessories and/or kits, please call SANUVOX at 1-888-726-8869
or visit www.sanuvox.com.