Page
1
of
5
S300 VOC FOR SMOKING ROOM
INSTALLER INSTRUCTIONS
For a 2400 cubic feet maximum smoking room
Please use these instructions along with the complete S300 instruction manual
Box contains:
•
One (1) S300 VOC unit that includes:
o
One (1)
‘’J’’ lamp UVC/UVV with yellow tips (part
LMPHGXJ105-1
2’’ expos
ed
)
o
One (1)
‘’J’’ lamp all UVV with blue tips (part
LMPHXJ105
)
o
Two (2) Multi voltage ballasts (part
BST120/277GL
) and 2 lamp-holding brackets
o
One (1) Relay (part
MSCELC16
) connected to all UVV lamp
o
Twenty (20) feet of wire that can be inserted in BX shield.
o
One (1) VOC controller (part
MSC1A
)
factory’s
pre-set
•
Two (2) replacement pre-filters (part
MSCFTR10
)
LAMP INSTALLATION
1.
Remove the 6 screws on the front cover (The one with the SANUVOX logo). Put aside.
2.
Remove the BLUE END CAP lamp from packaging.
Use
the gloves provided.
3.
Insert the lamp in the second clamp and tighten.
(furthest clamp from opening)
4.
Holding the cap with one hand, plug the white
connector tightly on the lamp
5.
Remove the YELLOW END CAP lamp from packaging.
Use the gloves provided.
6.
Insert the lamp in the first clamp and tighten. (closest
to opening)
7.
Holding the cap with one hand, plug the white
connector tightly on the lamp
8.
Put the cover back on with the 6 screws
Controller casing
Controller Opened
Relay
20ft wiring
