15
8
09
S2
S3
S1
6
7
S1
6. Hold the end of the anchor
S1
*
, while sliding the cap
P
against the drywall.
7. Snap off the ends of the anchor
S1
*
to lock in place.
CAUTION:
Be sure the cap
P
is seated against the drywall surface and the ends of the anchor do not extend beyond the cap
P
- cut if neccessary.
8. Install the four screws
S2
*
and washers
S3
*
and firmly tighten until the washers are pulled flush against the wall plate
09
.
CAUTION:
Avoid potential personal injury or property damage! All four screws
S2
*
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
09
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
P
P
S1
*
Steel Stud Anchor Kit is NOT INCLUDED
Contact Customer Service at 1-800-359-5520 to have the additional hardware shipped directly to you.
