10
3
4
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
: Pilot holes must be drilled to a depth of 2 3/4 in. (70 mm). Be sure to drill into the center of the stud.
4. Install the wall plate
09
using four lag bolts
11
. Tighten all lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
11
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
09
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
Go to STEP 3 on PAGE 16.
11
09
2 3/4 in. (70 mm)
7/32 in.
(5.5 mm)
