18
Manage Cables - Cable Tunnel
1
NOTES:
●
This product is
NOT
recommended for brick, plaster, or wallpa-
pered walls.
●
If wall has been painted, allow paint to cure at least 30 days be-
fore installing cable tunnels.
●
Wipe away any dirt, dust, grease, etc. on the surface and let dry
completely before installing.
●
The tunnels
25
can be painted to match your wall.
●
The tunnels
25
can be cut to fi t the length required.
To Remove Adhesive Clips
1. Insert a fl at object (e.g. - knife blade) behind the clip and the adhe-
sive pad and pry off the plastic clip.
2. Peel
off the adhesive pad with your fi ngers.
3. If adhesive residue remains, use a cloth soaked in an organic
solvent to wipe away the residue.
NOTE:
First test the solvent in a concealed spot to make sure it will
not damage the wall surface.
23
23
24
Space clips
23
evenly along the length of the tunnel(s)
25
with a clip near each end. To combine tunnels, use the long
clip
24
to connect where they meet.
A
Press firmly until clips snap in place.
B
Peel off backing of adhesive pads on clips.
NOTE:
if using two tunnels, install fi ve clips - four
23
clips and one long clip
24
.
If using only one tunnel, install three clips
23
.
A
B
