13
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
15
.
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate
16
using washers
17
and lag bolts
18
. Tighten the lag bolts
18
only until the washers
17
are pulled firmly against
the wall plate
16
.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
18
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
16
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step
3
15
4
18
17
16
3 in. (75 mm)
7/32 in.
(5.5 mm)
