Santon AH10/2.2 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 12

Santon AH10/2.2 Скачать руководство пользователя страница 12

12

GUARANTEE

This product is guaranteed against faulty materials and manufacture for a period of 2

years from the date of purchase provided that:

1.

The unit has been installed in accordance with the Installation and User Instructions

and all relevant Codes of Practice and Regulations in force at the time of Installation,

and that all necessary controls and safety valves have been fitted correctly.

2.

Any valves and controls are of the Santon recommended type and specification.

3.

The unit has not been modified or tampered with in any way, and has been regularly

maintained as detailed in the Installation and User Instructions.

4.

The unit has been used only for heating potable water.

The unit is not guaranteed against damage by frost, and the inner container with integral

immersion heater is not guaranteed against excessive scale build-up.

This Guarantee in no way affects the statutory rights of the consumer.

The policy of Santon is one of continuous product development and, as such, we reserve

the right to change specifications without notice.

ENVIRONMENTAL INFORMATION

Hurricane Way,

Norwich,

Norfolk, NR6 6EA.

www.santon.co.uk

Santon products are manufactured from many recyclable materials.

At the end of their useful life they should be disposed of at a Local Authority Recycling

Centre in order to realise the full environmental benefits.

Insulation is by means of CFC-free polyurethane foam.

AFTER SALES SERVICE

t| 0344 8711530

e| [email protected]

«
...
10
11
12

Содержание AH10/2.2













Отзывы:

Нет отзывов