Bedienungsanleitung / User manual VTC-252P/BS
_________________________________________________________________________________
- 27 -
Bedienung des OSD Menüs
All camera adjustments are done via an OSD menu. On the camera there is a mini-joystick.
Press onto the joystick and a menu pops up in the video picture. You can now move the
joystick left/right/up/down in order to get to the desired menu item. For confirming your
choice, press onto the joystick.
In case the menu says “SET key”, this means pressing the joystick.
This camera is pre-equipped with a DC lens.
The setting has to stay at “DC”.
SHUTTER:
Adjustment of picture shutter.
Auto:
Press onto the joystick to open the menu for brightness setting.
FLK:
FLK (Flickerless) can be set if picture vibration occurs caused by e.g. a
non 50 Hz light source.
Manual
:
Press onto the joystick and a menu for setting values pops up. Press
again onto the joystick (return) to confirm your selection.
Fixed
:
Press onto the joystick and a menu for setting values pops up. Adjust
the shutter values here. Press again onto the joystick (return) to
confirm your selection.
BLC (backlight compensation):
OFF
ON
BLC AREA: You can select the active BLC area using the joystick.
By longer pressing onto the joystick a sub-menu pops up which
enables to directly select or delete all areas. „Return“ saves the
values.
Select „Exit“ to quit.
BLC Ratio:
Select the desires BLC value.
Return:
Exit the BLC settings.
