Bedienungsanleitung / User manual VTC-252P/BS
_________________________________________________________________________________
- 23 -
Items included in the delivery
1 x camera VTC-252P/BS
1 x cable adapter BNC socket/plug
1 x user manual
Installation
(also see the pictures on the following pages)
This camera is a colour dome camera. It has been developed for indoor CCTV applications.
You will find the technical data at the end of the manual.
1. Bracket and camera installation
Make sure to fix the camera onto a solid basis which is capable to carry the weight of the
camera. Ensure that the camera is safely installed by using only suitable screws.
2. Power supply and monitor impedance
Only use a stabilised power supply unit with sufficient wattage (see chapter “Specifications”
for recommended power supply). Only approved cables should be used.
If a monitor is connected directly, the monitor impedance has to be set to 75 Ohm. Verify the
position of the switch in case the video picture is of poor quality.
The yellow BNC-plug is for video output.
The red outlet is for power supply input.
A cable adapter BNC socket/plug is included in the delivery which can be put onto the
additional video output, e.g. to connect a monitor during the camera installation phase in
case the regular cable has already been laid (picture 2).
3. Camera housing
Open the camera housing by carefully turning it counter-clockwise (see picture 1).
Close the camera housing by carefully turning it clockwise (see picture 1).
Improper handling of the appliance will invalidate the warranty.
