background image

User Manual  
SCC-242KZNA 

_________________________________________________________________________________ 

 

- 5 - 

 

Safety instructions 

 
 

  Before operating the appliance, please read this manual carefully and retain it for further 

reference. 

  Before  cleaning  the  appliance,  it  has  to  be  switched  off  and  unplugged  from  the  power 

outlet. Wipe the appliance with a soft damp cloth.  
Do not use harsh cleansers or aerosols for cleaning. The type label may not be replaced. 

  Do  not  use  attachments  unless  recommended  by  the  manufacturer  as  they  may  affect 

the functionality of the appliance and result in the risk of fire, electric shock or injury.   

  Never install the appliance in areas exposed to water or other liquids. 

 

  The  appliance  has  to  be  installed  in  a  safe  and  stable  location  according  to  the 

instructions  of  the  manufacturer.  Care  should  be  used  when  moving  heavy  equipment. 
Quick  stops,  excessive  force,  and  uneven  surfaces  may  cause  the  appliance  to  fall 
causing serious injury to persons and damage to objects. 

  Openings in the appliance, if any, are provided for ventilation to ensure reliable operation 

of the appliance and to protect if from overheating. These openings must not be covered 
or blocked. Please make sure that the appliance does not overheat. 

  The  appliance  should  only  be  operated  from  the  type  of  power  source  indicated  on  the 

marking label. If you are not sure of the type of power supplied at the installation location, 
please contact your local dealer.  

  An  appliance  which  is  powered  through  a  polarized  plug  (a  plug  with  one  blade  wider 

than the other) will fit into the power outlet only one way. This is a safety feature. If you 
are  unable  to  insert  the  plug  into  the  outlet,  try  reversing  the  plug.  Do  not  defeat  the 
safety purpose of the polarized plug.  

  If  the  appliance  is  powered  through  a  grounding-type  plug,  the  plug  will  only  fit  into  a 

grounding-type  power  outlet.  This  is  a  safety  feature.  If  your  outlet  does  not  have  the 
grounding plug receptacle, contact your local electrician.  

  Route  power  cords  and  cables  in  a  manner  to  protect  them  from  damage  by  being 

walked on or pinched by items places upon or against them. 

  For protection of the appliance during a lightning storm or when it is left unattended and 

unused  for  a  longer  period,  unplug  the  appliance  from  the  wall  outlet.  Disconnect  any 
antennas  or  cable  systems  that  may  be  connected  to  the  appliance.  This  will  prevent 
damage to the appliance due to lightning or power-line surges. 

  Do  not  overload  wall  outlets  and  extension  cords  as  this  can  result  in  a  risk  of  fire  or 

electric shock. 

  Never  insert  items  into  the  openings  of  the  appliance.  They  may  touch  parts  under 

electric current which may cause an electric shock.  

  Never pour any liquids over the appliance.  
  In case of any operating interruption or a complete operating failure please switch off the 

appliance  and  disconnect  it  from  the  wall  outlet.  Never  attempt  to  service  or  repair  the 
appliance yourself, as opening or removing covers may expose you to dangerous voltage 
or other hazards. Refer all servicing to qualified service personnel. 

  When  replacement  parts  are  required,  be  sure  that  the  service  technician  uses 

replacements parts specified by the manufacturer or  that have the same characteristics 
as the original part. Unauthorized substitutions may result in fire, electric shock or other 
hazards. 

Содержание SCC-242KZNA

































Отзывы: