User Manual
SCC-242KZNA
_________________________________________________________________________________
- 25 -
Menu item
Sub-menu item
Additional items / Remarks
PTZ Speed
1-3
Set Zero
OK
Move the dome to the horizontal coordinates.
Power Up
Power Up
Define the PTZ action the dome has to assume
when it is booted:
None, auto, preset, pattern, tour, scan
Parameter
Select the number for prreset/pattern/tour/scan.
Back, Exit
Menu
Password
Password
Define whether the OSD menu is to be protected
by a password (On, Off).
Setting
Set the password for accessing the OSD menu
and then „Save“ it. Password protection is then
active (“On”). (see above).
Note:
If an invalid password is entered three times, the
system shows an 8-digit internal code. Please
contact the technical engineer for help.
Back, Exit
Menu Idle
Off, 1 min., 2 min.,
3 min., 4 min., 5 min.
If you set a time here, the OSD menu will
disappear once this time has elapsed. If you
select “Off”, the OSD menu will be displayed at all
times. If you wish to close/hide theOSD menu,
click on “Enter” or “Exit” (see below).
(Next Page)
PTZ Auto
Stop
5/10/15/20/25/30 sec,
Off
The dome will stop all PTZ operations when there
is no command for the specified time.
PTZ
Correction
On, Off
Back, Exit
