Bedienungsanleitung /
User manual
DSR-2504H, DSR-2516H
_________________________________________________________________________________
- 88 -
3.5 PTZ connection
Please use the RS-485 connector.
You can also use it to connect a speed dome or a keyboard.
Here is how to connect a speed dome to the recorder:
Pull out the RS-485 terminal block from the terminal bar.
Loosen
the
screws.
Insert the signal wires into the A and B connections:
A = TX+
B = TX-
Pull the screws tight again.
Re-insert the RS-485 block into the terminal bar.
Connect the video cable of the speed dome to the video input of the recorder.
Note:
Please note that the transmission protocol is properly set.
