Bedienungsanleitung /
User manual
DSR-2504H, DSR-2516H
_________________________________________________________________________________
- 110 -
Clicking this symbol, the whole live image is covered with a motion grid.
Clicking this symbol, the entire motion gird is removed from the live image, i.e. no
area has been activated for motion detection.
Clicking this symbol, you can test the sensitivity with regards to the surrounding
conditions. This symbol is displayed once motion has been detected.
Clicking this symbol is to save the settings.
Clicking this symbol, you exit the grid settings and return to the motion menu.
Click on “Apply” to save your settings.
Schedule:
Here you can set the schedule for motion detection.
The procedure is the same as described in chapter 8.1.4.1.
Note:
By default, the grid is fully enabled, i.e. it is blue, hence the schedule is active for all days
and times. To remove specific days or times, please use the rubber.
8.1.5.3 Main menu
Setup
Alarm
Video loss
Here you can define the trigger in case of video loss.
The procedure is the same as described in chapter 8.1.4.1.
