Bedienungsanleitung / User manual
HEL-62D
_________________________________________________________________________________
- 18 -
Installation
1. First, unpack the wall bracket. Lead the required cables (power, video) through the
wall bracket. Mount the wall bracket to a wall which is capable of carrying the weight
(fig 1 and 2).
2. Unwrap the housing and open the upper housing part using a suitable tool (fig. 3).
First, loosen the two screws of the camera mounting plate.
Use a ¼” screw to mount
the camera which is to be installed into the housing (fig. 4). Then connect the
connection board to the camera’s power supply (fig. 5).
Note:
Do not screw the camera too tightly so that you can still adjust it later.
Note:
When using a 2-
wire cable, „phase“ and „neutral“ need to be connected. Please pay
attention to the security instructions!
