Santak ARRAY 4, Руководство пользователя

Страница: 20 / 37

6. OPERATION OF ADDING / REMOVING UPS-MODULES
17
6.2.2 Procedures of removing the UPS-Module
1) Remove the plastic cover panel from the position where you want to remove the
UPS-Module.
2) Use two hands to hold the handle and press the latch-levers in the handle units to
slide the UPS-Module slowly out of the frame until you see the marks “
●
” on the top
of the UPS-Module, then hold the UPS-Module on the left and right sides to pull it out
from the frame.
Note
※ ：
Do not use too much strength when pulling the module to avoid it dropping.