Santa Fe OASIS105, Инструкция по установке и эксплуатации

Страница: 5 / 22

5
800.533.7533 | Santa-Fe-Products.com Santa Fe Oasis105 Installation & Operation Instructions
Drain Installation
The Santa Fe Oasis105 dehumidifier generates condensate.
The Santa Fe Oasis105 features a positive pressure drain that does not require a P-Trap. The unit includes a secondary
drain pan with a dedicated float switch port. In order to use this feature the internal plug needs to be knocked out.
An optional condensate pump kit is available for use with the Santa Fe Oasis105 dehumidifier and may be installed if lift
is required to dispose of condensate. Condensate is automatically pumped to a remote location when the water level in
the pump’s reservoir rises to close the float switch.
Product overview and control image
*
Primary
Drain Port
Secondary
Drain Port
End View
PVC Trap
Use care to keep the hose as flat to the floor as possible. Be sure the hose is not kinked or otherwise restricted so
water can pass through the hose freely. Improper installation of the drain hose may result in water leakage.
If the Santa Fe Oasis105 dehumidifier is located too far from the floor drain and the provided hose does not reach, you
may use a 1/2” PVC rigid pipe to extend the drain.
Rigid PVC tubing is readily available from your local hardware store. Be sure the drain height is no higher than the
Oasis drain port.
An optional condensate pump kit may be installed if lift is required to remove condensate. To order, contact your local
dealer or visit our website at www.santa-fe-products.com. You may also reach us by phone at (800) 533-7533 and we
can direct you to find a dealer.
CAUTION!
CHECK DRAIN LINE WHEN CHANGING FILTER TO ENSURE THERE IS NO BUILD UP OF ALGAE OR SLUDGE.