8
Santa Fe Ceiling HEPA Installation & Operation Instructions
Santa-Fe-Products.com | 800.533.7533
UL listed switches are used to turn each fan in the fan box on or off.
The fan boxes include one UL listed 5 Amp circuit breaker. If the fan box switch does not activate the fan,
reset the circuit breaker by pressing the round button in the center
A 4” junction box cover is used to cover the internal wiring.
• Use this unit only in the manner intended by the manufacturer. If you have questions, contact the
manufacturer.
• Before servicing or cleaning unit, switch power off at service panel and lock service disconnecting
means to prevent power from being switched on accidentally. When the service disconnecting means
cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.
The Ceiling HEPA fan boxes are to be used with the Santa Fe Ceiling HEPA system only. No other use
is allowed.
Adjusting the Amount of Air Flow
• The fan box is controlled with a switch for each blower. After mounting, duct installation is
complete, and power is supplied, turn each blower switch to “ON”. There is one speed for each
blower.
• If the blower does not operate, press the button on the circuit breaker to reset.
• The air flow rate may not be balanced between each of the supply diffusers, this is normal
operation and depends on many variables.
• Total system air flow is 500 cfm total for two blowers and 250 cfm for one blower.
WIRING CONTINUED
WARNING!
WARNING!
THE FAN SWITCHES MUST BE IN THE OFF POSITION DURING INSTALLATION. THE FAN BOXES
ARE RATED FOR DUCT USE ONLY AND DO NOT PROVIDE PROTECTION FROM FAN BLADES UNTIL
DUCTING INSTALLATION IS COMPLETE.
CAUTION!
CAUTION!
FOR GENERAL AIR FILTRATION ONLY. THIS DEVICE DOES NOT PROVIDE EXTERNAL
VENTILATION. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND
VAPORS.
WARNING!
WARNING!
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE
FOLLOWING
OPERATION
