3 Unit Assembly
3.1 Installing Casters (Optional)
Included with your Santa Fe Advance are four casters for easy mobility of
the unit. Casters are packed in one of the styrofoam trays in the shipping
box as shown in Figure 1. See Figures 2 and 2a for installing casters.
Installing Casters
1. Lay down a protective pad (pillow, blanket, etc.).
2. Carefully turn unit onto side opposite filter opening and drain port.
3. Align caster shaft with holes as shown in Figure 2.
4. Press casters into holes until fully seated.
5. Carefully bring unit to upright position.
6. Wait 10 minutes before operating.
Note: Operating the unit immediately after bringing it to an upright
position can possibly damage the compressor. A short amount of time
is needed to allow the oil to return to it’s reservoir for lubrication.
3.2 Drain Hose
Take drain hose off of drain port. With scissors, cut one inch off of hose
end to eliminate dented area. Place drain hose end on drain port until
fully seated. Refer to Section 4.3 regarding proper drainage.
Santa Fe Advance Owner’s Manual
5
Figure 3:
Drain port.
Figure 4:
Drain hose position.
Figure 2:
Insert casters
in locations.
Figure 1:
Casters
in packing tray.
Figure 2a:
Push caster
in until fully seated.
IMPORTANT
