Sansui HDLCD1908B, Руководство пользователя

Страница: 14 / 27

14
Connections to other equipment
Using an AV Amplifier with built - in digital surround
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including
Dolby Digital Surround audio that sounds just like the movie.
Connect an AV amplifier with built - in Dolby Digital decoder, or etc. as shown below.
NOTE:
Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog
broadcasting.
Coaxial digital audio output doesn’t output the sound of external inputs.
When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio. There will be no
sound output if connected to an AV amplifier with a built-in DTS decoder.
•
•
•
Coaxial digital cable
(not supplied)
Coaxial Digital Audio Output
Rear of the LCD TV
Front
Speaker
(Left)
Front
Speaker
(Right)
Subwoofer
TV
AV Amplifier with built-in digital
surround decoder as listed above
Center Speaker
To Coaxial Digital Audio Input
Surround
Speaker (Left)
Surround
Speaker
(Right)
To connect the LCD TV to a PC (Personal Computer)
Before you connect this LCD TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate
(60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA
connector PC MONITOR on the rear of the LCD TV. Attach the connectors firmly with the screws on the plug. In
case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia computer and to
the AUDIO connector of the PC AUDIO IN jack of the LCD TV.
Press INPUT on the remote control to select PC mode.
Switch on the computer. The LCD TV can operate as the computer monitor.
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
VGA 720x400 70Hz
SVGA 800x600 60Hz
XGA 1024x768 60Hz
WXGA 1280x768 60Hz
WXGA 1280x720 60Hz
WXGA 1360x768 60Hz
To return to normal mode
Press INPUT again.
NOTE:
The on-screen displays will have a different appearance in PC mode than in TV mode.
If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV-screen.
•
•
VGA cable (not supplied)
Rear of the LCD TV
To PC AUDIO IN jack
To PC
MONITOR
IN
Audio cord (not supplied)
34C1121B.indb 14 34C1121B.indb 14 8/5/08 1:25:49 PM 8/5/08 1:25:49 PM