Tighten Clockwise
Packaging
Plug
Remote Control
Power Cable
Adjust the Angle
01
1. Take the lamp out of the box and place it down safely onto a flat and stable
surface. Proceed to read the instructions thoroughly and keep them for future
reference
.
2. Loosen the wheel screws on both sides of the lamp by turning them counterclock-
wise, until the lamp can be rotated.
3. Adjust the lamp to a desired angle, then tighten the screws by turning them in a
clockwise direction.
Two Wheel
Screws
Hole position of the mounting plate
M8 Hex Nut
Installation Plane
M8 Expansion Bolt
Fixed Lamp
02
1. Adjust the lamp to a desired angle.
2. Assure pre-keep expansion bolts onto the installation plane according to the
holes’ positions on the lamp mounting plate.
3. Use hex nuts to fix the lamp onto the plate.
Torque applied to the nut can't exceed 20N.m
Infrared Signal
Receiver
1
Basic Parameter
03
Attentions
04
5-Year Unlimited warranty
05
Basics information
06
LED Floodlight
90~264V 50/60Hz
50W
120°
5700K
Brown RAL8019
Product Name
:
Input Voltage :
Rated Power :
Beam Angle :
CCT :
Enclosure Color :
2
1. Please confirm the input voltage before using. Improper use of voltage may
damage the product and cause safety hazards.
2. DO NOT disassemble the product privately because LED module is
non-replaceable.
3. DO NOT turn on the power during installation.
4. DO NOT let amateurs install or maintain the product, please get the work done
by professionals.
5. If the external flexible cable of the product is damaged, please have it replaced
by its manufacturer, service agent or qualified persons to avoid hazards.
If you have any questions or concerns, please feel free to contact us via
[email protected] before returning the units to us.
Shanghai Sansi Technology Co.,Ltd
http://www.sansiled.com
