Sansaire Immersion Circulator, Руководство пользователя

Страница: 7 / 11

13 12
E
n
g
li
sh
r
EmoVing baCk CoVEr and gratE
The circulator has a back cover that is detachable. It should only be detached
when the circulator is off and unplugged for cleaning and never during use.
To open: Detach the clamp, slide the latch left, and pull the back cover
down and and away. With the cover off, the grate can be detached as well.
To close: Place the grate in the slot running along the bottom of the circula-
tor’s front, inner surface. The two grooves on the grate should be aligned
towards the left and right side of the casing. The back cover can now be
slid back on and latched, followed by the attachment of the clamp.
C
lamp position
The clamp on the back of the Sansaire™ Immersion Circulator has two different
configurations. In most cases the clamp should attach to the machine on the
inner peg but if the container wall is thicker, the second peg can also be used.
To move the clamp between pegs, press the clamp towards the center of the
circulator and pull down gently. Once the clamp is off the axel, align the axel
with the desired peg and pull up gently. The clamp can be completely detached
for cleaning. However, the circulator should never operate without the clamp
attached and secured to a bath.