Sansaire Immersion Circulator, Руководство пользователя

Страница: 5 / 11

9 8
E
n
g
li
sh
f
EaturEs
7. p
ump
o
utlEt
– The circulator moves water
through the pump outlet to keep the water
bath at an even temperature.
8. p
owEr
C
ord
p
lug
9. r
EsEt
– For safety, the machine enters reset
mode if water level is too low.
10. C
lamp
– The clamp attaches the machine to
the wall of a water container.
11. l
atCh
– The latch locks and unlocks the
back cover to the base of the immersion
circulator.
12. b
aCk
C
oVEr
– Slides off for easy access to
heating element and pump impeller for clean-
ing. Always operate with the cover attached.
13. g
ratE
– Removable metal base at the bottom
on the circulator to keep heating elements free
from contact with other objects.
1. t
EmpEraturE
r
ing
– Turning the ring sets
the target temperature of your water bath.
2. t
argEt
b
utton
– Used to show the target
temperatre on the display temporarily.
3. p
owEr
b
utton
– Used to turn the circulator
on and off. When on, heating and circulating
begins immediately.
4. C/f
– This button to swiches between Celsius
and Fahrenheit units on the display.
5. d
isplay
– During normal operation, the
display shows the current temperature of the
water bath. When you turn the temperature
ring, the display temporarily shows target
temperature.
6. m
inimum
f
ill
/m
aximum
f
ill
– These lines
indicate the minimum and maximum fill levels
for the water bath. Never operate your imme-
sion circulator if the water level is outside of
these boundaries, as it may cause damage to
the unit.
9
8
10
2
3
4
1
5
6
7
11
12
4
3 2
13