LOCATION OF CONTROLS AND INDICATORS
1. AM Indicator
10. HOUR Button
2. ALARM ‘ON’ Indicator
11. MIN (MINUTE) Button
3. LED CLOCK Display
12. SNOOZE Button
4. Battery Compartment
(At Bottom of Cabinet)
13. TIME Adjustment Button
5. AC Power Cord
14. ALARM Button
6. NIGHT LIGHT
15. SLEEP Button
7. FUNCTION Selector
(OFF/ON/ AUTO/ BUZZER)
16. Speaker (At Rear Cabinet)
8. VOLUME Control
17. BAND Selector (AM/FM)
9. NIGHT LIGHT Switch
18. TUNING Control
POWER CONNECTION
Plug the AC cord of the radio into a 120V~ 60Hz AC power outlet socket.
SETTING THE CLOCK
When you connect the radio to your AC outlet for the first time the clock display will
begin flashing "12:00". The flashing will stop when you set the time.
1. Depress the TIME button and the HOUR button to set the correct Hour.
2. Depress the TIME button and the MIN button to set the correct Minute.
NOTE:
Be sure to observe the AM indicator to make sure that the time is set correctly
for AM or PM. If the AM indicator is 'On', the time displayed is "AM". If the AM indicator
is 'Off, the time displayed is "PM ".
LISTENING TO THE RADIO
1. Set the BAND Selector to the desired band, AM or FM.
2. Set the VOLUME Control to a low setting.
3. Slide the FUNCTION Selector to the ON position.
4. Select your desired station with the TUNING Control.
5. Adjust the VOLUME Control to the desired listening level.
6. When you have finished listening, slide the FUNCTION Selector to the “OFF”
position to turn the radio 'Off”
ANTENNA INFORMATION
AM - The AM bar antenna is built inside the radio. If AM reception is weak, change
the position of the radio until the internal antenna picks up the strongest signal.
FM - The FM antenna is built-in to the AC power cord. If FM reception is weak, try
varying the position and direction of the power cord until you find the strongest
signal.
- 5 -
- 6-
AM Indicator
Alarm Indicator
- 7 -
- 6 -
