ALARM OPERATION
SETTING THE WAKE UP TIME
1. Depress the ALARM button and the HOUR button to set the correct wake up Hour.
2. Depress the ALARM button and the MIN. button to set the correct wake up Minute.
NOTE:
Be sure that you have set the wake up time correctly by observing the AM
indicator. If the AM indicator is 'On', the wake up time is "AM". If the AM
indicator is 'Off’, the wake up time is "PM".
CHECKING THE WAKE UP TIME
Whenever you want to check the wake up time, simply press ALARM Button. The
display will change from current time to wake up time. Release the ALARM button to
return to current time.
WAKE TO RADIO
1. Slide the FUNCTION Selector to ON and select the band, station, and volume level
that you wish to hear when the alarm comes 'On', then slide the FUNCTION
Selector to AUTO position. The ALARM Indicator will light up.
2. Reconfirm the wake up time settings by pressing the ALARM button.
3. The radio will turn 'On' at the selected wake up time and will play for about two
hours and then shut off automatically.
4. To stop the radio, press the ALARM button. The radio will stop but the alarm
remains set and will turn the radio on again at the same time on the following day.
5. If you do not want the alarm to turn the radio on the following day, set the
FUNCTION Selector to the 'OFF' position.
WAKE TO BUZZER
1. Set the FUNCTION Selector to the BUZZER position. The ALARM indicator will
light up to confirm that the alarm is set.
2. At the selected wake up time the buzzer will sound and will continue for about two
hours and then shut off automatically.
3. To stop the beep, press the ALARM button. The beep will stop but the alarm
remains set and will turn the buzzer on again at the same time on the following day.
4. If you do not want the alarm to turn the beep on the following day, set the
FUNCTION Selector to the 'OFF' position.
SNOOZE ALARM
After the radio or buzzer alarm sounds, you may press the SNOOZE button for a few
more minutes sleep. The alarm will stop for approximately 9 minutes and then turn on
again.
SLEEP OPERATION
- 7-
- 8-
SLEEP TO MUSIC
You can program the sleep timer to play the radio for up to 1 hour 59 minutes and then
shut off automatically.
1. Slide the FUNCTION Selector to “ON” and select the band, station, and volume
level that you want to listen then slide the FUNCTION Selector to either “OFF”,
“BUZZER” or “AUTO” position.
2. Press the SLEEP button. The display will briefly show "0: 59". While holding the
SLEEP button press the HOUR button, the display shows "1: 59" and the radio will
begin to play. After 1 hour 59 minutes the radio will shut off automatically.
3. To adjust the amount of time that the radio will play before shutting off, hold the
SLEEP button. Then press MIN (Minute) button to adjust the desired sleep time.
When the desired amount of sleep time appears in the display, release the buttons.
4. To cancel the sleep timer before it counts down to "00" and shuts the radio "off",
press the SNOOZE button.
SLEEP AND WAKE TO MUSIC
1. Slide the FUNCTION Selector to “ON” and select the band, station, and volume
level that you wish to hear when the alarm comes 'On', then slide the FUNCTION
Selector to the “AUTO” position. The ALARM Indicator will light up.
2. Follow steps 2 to 3 in “SLEEP TO MUSIC” above to set your desired sleep time.
The unit is now programmed to turn off automatically at the Sleep Time you
selected and then to turn on again at the preset “Alarm Time”.
3. To cancel the sleep timer before it counts down to "00" and shuts the radio "OFF",
press the SNOOZE button.
IMPORTANT:
Remember that the station and volume settings you choose for the SLEEP TO MUSIC
operation are the same settings you will hear if you set the alarm for wake to radio the
following morning.
NIGHT LIGHT OPERATION
Depress the LIGHT Button once to turn the night light ‘On’ and again to turn the night
light ‘Off’.
- 9 -
- 8 -