Sanotechnik SanoSpa SPA08, Инструкция по программированию

Страница: 48 / 58

PROGRAMMING INSTRUCTIONS
48
2. FUNCTION SUMMARY
(1) Constant temperature, preset heater and display and operation of water temperature.
(2) Three surfing pumps, One circulation pump also, One blower.
(3) Color of Lights are change & changeless synchronization.
(4) CD frequency input. Display of radio frequency and storage for 10 channels.
(5) Display and 87 grades adjustment of volume.
(6) Long Circulation and Phase of time Circulation cleaning.
(7) Display and set of 24 hours model.
(8) Power loss memory for all setting.
(9) Fahrenheit & Celsiur temperature shift.
(10) Frozen preventing control.
(11) Light of Keys.
(12) Lock of buttons of computer board.
(13) Selection of 110-120VAC or 220-240VAC, And Single-Phase or Three Phase Four line mode
(14) Selection one AC power output when “CD” is working, This is using for DVD or TV.
(15) Selection POWER Controll.
(16) Selection electric current of all load are measure.
3. OPERATIONS
1. When first turning on the power, the backlight will bright of halt, and the LCD will show the
present time and temperature. It will show “E1” if the sensor is open/short circuit. When part
of radio frequency showed “---”, it indicates that the status of the system is “
Waitting Mode ”,
so as well as the pre-heat and circulation cleaning.
Fig.3: Normal temperature. Fig. 4: Sensor open circui
or short circuit
2. Lock Operation:
The lock will start work by pressing “ ”Button in the status of “Waitting Mode”or no-
pressing operation lasting above 30 minute. In the status of Locked, press the button
“ ” twice, the lock will be unlocked, and the word “LOCKED” will disappear.