SANLI GTS43, Руководство оператора

Страница: 15 / 29

Operator’s Manual Sanli GTS43 / 15
3.24 Advice for cutting
Cut the grass by swinging the cutter head steadily from left to right, moving
slowly forward keeping the deflector guard parallel to the ground. Taking a
light cut is always preferable to a heavy cut as it allows the grass to be
thrown well clear of the spinning nylon spool, helping prevent it from
becoming choked with grass.
To cut tall grass, work progressively from the top down to the base of the
grass. Never cut damp grass and do not overload the machine.
To maximise the life of the nylon line, do not allow the rotating line to
continuously impact hard objects such as stones, walls and posts.
Be of kick-back when the machine’s moving parts hit a solid object.
NOTE: Regularly removing cut grass that has accumulated between the nylon
spool and the inside of the deflector guard while minimise risk of vibration.
3.25 Changing the nylon spool
Always switch off the engine and wait for the machine to come to a
complete stop before adjusting, maintaining or servicing the brush cutter.
Locate the two clips holding in place the lid of the nylon spool housing.
Using your thumb and index finger, squeeze and remove both clips and lift
off the lid (fig. 13 and 14).
Lift out the nylon spool (fig. 15).
Install a full nylon spool by reversing the above steps, not forgetting to
insert the two lines through the small metal-ringed openings on either side
of the housing. Replace and ensure that the lid is properly closed and
fastened.