Sankosha LP-690E-V3, Инструкция по эксплуатации

Страница: 28 / 58

26
Service Menu
When the service button (BP1) on board in control box is pushed, initialization of volume setting and
check of program version and running time are possible as well as input test, output test, volume function
setting, dip function setting, and timer setting.
■
Following are the service button positions on board and functions of buttons in service menu.
① Service Button
When this button is pushed, “In1” is displayed and the service menu starts.
②
Counter Clear Button
This button functions as a return button in the service menu.
③ Short Button
Lamp of this button is turned ON/ OFF when test operation is ON/ OFF in Input test.
④
Enter Button
If this button is pushed, selected menu or changed setting is decided.
⑤ Set/Select Dial
While the Service Menu works, this dial works to select the Menu, proceed to the next Menu, and
then change the Setting.
・
Turn clockwise: Proceed to the next Menu. The number will increase when setting.
・
Turn counterclockwise: Return to the previous Menu. The number will decrease when setting.
Board Control Panel
①
It is extremely dangerous in Control Box.
Do not touch anywhere unless otherwise specified.
WARNING
②
④
⑤
③