Sankosha LP-690E-V3, Инструкция по эксплуатации

Страница: 24 / 58

22
⑤
Set cover extension rods on collar cover. (long 2 rods) (Figure-3)
⑥ Put collar cover on middle press and hook spring hook on cover extension rods.
(Front and rear - 2 place, Right and left - 2 place) (Figure-4)
⑦ Put the guard plate in original position.
Cover extension rod (long)
Spring hook
Beware that the hook are very hot
just after steam stop.
Figure-3
Figure-4
CAUTION : In the beginning of changing the silicone, some odor could occur when warming up.
This is because of the new silicone. It will not harm you at all.
Caution