For Example
：
From 5Hz
to
45Hz
For example: set
F1414=10
During status monitor display, frequency setting as the below method whatever is on operation or at stop
※
1
While no needing the frequency setting
，
press
【
PR/CL
】
key return to status monitor display Mode.
Basic operation
Function code setting
Normal operation used for the changing the value of function code.
-22-
Operation
Display
Description
Status monitor display
（
Frequency display
）
【
ENTER
】
Input value display the last right digit.
(Revise the value while this digit flashing)
※
(
1)
【＜】
*3
Press
【＜】
key one time, flahsing position will move to
the left on one digit.
Press
【＜】
key 3 times
，
ten digits flashing.
（※
1
）
【
∧
】
*4
Press
【
∧
】
key every one time, value added 1
Press
【
∨
】
key every one time, value minus 1
Press
【
∧
】
key 4 times, ten digits value will be changed
to “4”
【
ENTER
】
Press
【
ENTER
】
, frequency setting finished, and then back
to the status monitor interface.
Operation
Display
Description
Status monitor display
（
frequency display
）
【
PR/CL
】
Press
【
PR/CL
】
key show function code input
interface.
Second display parameters number10
flashing,
and the value could be revised.
