５
setting, press the ENTER button to save the Settings.
(1)
address setup
After entering the address setting
interface, as shown in Figure 6, "01" indicates
the local address number. Press the left and
right key to move the cursor around, press the
MUTE key the number add one,while press
the SELF-TEST key it subtract one. After the setting is completed,
press the ENTER key to save and exit. If only query, also press
ENTER key to exit.
(2)
language setup
After entering the language setting
interface, as shown in Figure 7, the Chinese
state is selected. Press the ENTER key to save
and exit after the setting is completed. If only
query, press the right key to exit.
(3)
display setup
After entering the display setting
interface, as shown in Figure 8, the display is
open. Press the ENTER key to save and exit
after the setting is completed. If only query,
press the right key to exit.
Note
：
The default address of the fire indicating panel is 01.
The default language is Chinese and the default display mode
is auto.
. Product Installation and Debugging
Ⅵ
1.
Installation method
The installation of a fire indicating panel requires the use of a
special supporting base, with a method of a wall-mounted pre-buried 86
box. The external cable is directly connected to the fire indicating panel,
and for the convenience of wiring, it is suggested to draw the cable to a
10cm outside of the 86 box. The supporting base is shown in Figure 9,
the size of which is 132mm x 108mm x 6mm (length x width x height),
and the installation spacing of the base and 86 boxes is about 60mm.
2.
Installation procedure
1) Fix the fire indicating panel base on the embedded 86 box.
2) Connect the cables led out of the box (86) according to the definition
of the terminal panel of the fire panel and fix it.
ADD
：
01
Figure 6 local
address setup
Chinese
English
Figure 7
language display
setup
OLED Open
OLED Auto
Figure 8 display
setup
