background image

DO NOT OIL the motor or the brush roll. The 

motor and brush roll are permanently sealed 

and lubricated.

To reduce the risk of fi re, electric shock, or injury:

  Do not use outdoors or on wet surfaces.

• Do not leave vacuum cleaner when plugged in. 

Turn off 

the switch and unplug the electrical cord when not in use 

and before servicing.

  Do  not  allow  to  be  used  as  a  toy.  Close  attention  is 

necessary when used by or near children.

  Use only as described in this manual. Use only manufacturerʼs 

recommended attachments.

• 

Do not use with damaged cord or plug. If vacuum cleaner 

is not working as it should, has been dropped, damaged, 

left outdoors, or dropped into water, return it to a service 

center before using.

  Do not pull or carry by cord, use cord as a handle, close a 

door on cord, or pull cord around sharp edges or corners. 

Do not run vacuum cleaner over cord. Keep cord away 

from heated surfaces.

• 

Do  not  use  extension  cords  or  outlets  with  inadequate 

current carrying capacity.

• 

Turn off all controls before unplugging.

• 

Do not unplug by pulling on cord. To unplug, grasp the 

plug, not the cord.

2

IMPORTANT SAFEGUARDS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER.

WARNING

SAVE THESE INSTRUCTIONS

To reduce the risk of electric shock, 

this appliance has a 

polarized plug (one blade is wider than the other). This plug 

will fi t in a polarized outlet only one way. If the plug does not 

fi t fully into the outlet, reverse the plug. If it still does not fi t, 

contact a qualifi ed electrician to install the proper outlet. Do 

not change the plug in any way.

GENERAL INFORMATION

Use  the  cleaner  to  pick  up  dirt  and  dust  particles. Avoid 

picking  up  hard  or  sharp  objects  that  could  damage  the 

vacuum cleaner.

Service Information

The instructions in this booklet serve as a guide to routine 

maintenance. For additional service information, telephone 

our  toll  free  number  for  the  nearest  Sanitaire Authorized 

Warranty Station. 

You should know the model, type and 

serial number or date code when you call:

USA: 1-800-800-8975     Mexico:  5670-6169

     

Canada: 1-800-800-8975

If you prefer, you can write to Electrolux Home Care Products 

North America,  Service  Division,  P.O.  Box  3900,  Peoria, 

IL 61612, USA. In Canada, write to Electrolux Home Care 

Products Canada, 866 Langs Drive, Cambridge, Ontario N3H 

2N7. Refer to The Sanitaire Warranty for complete service 

information.

Thermal Cut Off

This vacuum cleaner has a special thermostat that protects 

the  cleaner  in  case  of  motor  overheating.  If  the  cleaner 

suddenly shuts off, push the on/off switch off (0) and unplug 

the  cleaner.  Check  the  cleaner  for  a  possible  source  of 

overheating such as a full dust cup, a blocked hose or clogged 

fi lter. If these conditions are found, fi x them and wait at least 

30 minutes before attempting to use the cleaner. After the 30 

minute period, plug the cleaner back in and push the on/off 

switch on (l). If the cleaner still does not run, then take it to a 

Sanitaire Authorized Service Center for repair.

• 

Do not handle plug or vacuum cleaner with wet hands.

• 

Do not put any object into openings. Do not use with any 

opening blocked; keep free of dust, lint, hair, and anything 

that may reduce airfl ow.

• 

This  vacuum  cleaner  creates  suction  and  contains  a 

revolving brush roll. Keep hair, loose clothing, fi ngers, and 

all parts of body away from openings and moving parts.

• 

Do not place cleaner on furniture or stairs as the brush roll 

may cause damage. Place cleaner on fl oor with the handle 

in storage position while using attachments.

• 

Do not pick up anything that is burning or smoking, such 

as cigarettes, matches, or hot ashes.

• 

Do not use without dust bag or fi lter(s) in place.

• 

Belt pulleys can become hot during normal use. To prevent 

burns, avoid touching the belt pulley when servicing the 

drive belt.

• 

Use extra care when cleaning on stairs.

• 

Do not use to pick up fl ammable or combustible liquids such 

as gasoline, or use in areas where they may be present.

• 

Store your cleaner indoors in a cool, dry area.

• 

Keep your work area well lighted.

• 

Unplug electrical appliances before vacuuming them.

Содержание System_Pro SP5816











Отзывы: