6
Ask for GENUINE EUREKA replacement belts, Style RD
No. 52100A.
5
5. Place rubber end cap covers over both end caps (fl at
side against end cap). Align holes and secure. Then,
slant brush roll forward so end caps are in line with
slots in cleaner base.
6. Push brush roll into base.
8
8
8. Place slots of bottom plate over tabs of cleaner
base.
9. Seat and secure cam locks
7. Place lower side of belt into belt guide and pull to
stretch the belt around the left side of the motor
pulley. Rotate pulley to secure belt into groove.
How To Replace A Worn Belt
(continued)
Look for the
symbol.
Look for the
symbol.
GENUINE
Look for the
symbol.
Look for the
symbol.
Brush Roll
The rotating brush roll sweeps and combs the carpet nap.
Keep the brush roll free from hair and threads so it will con-
tinue brushing. When the bristles of the brush roll no longer
touch a straight edge held against the bottom plate, the
brush roll is ineffective because the bristles no longer touch
the carpet nap. To maintain the most effective cleaning, the
brush roll should be replaced.
Headlight Bulb (Standard on most models),
PN 40009A
CAUTION: Turn off the switch and unplug the electrical
cord before replacing headlight bulb.
Headlight style varies by model. Locate the notches that
release the tabs at either (1) top, (2) side, or (3) bottom of
the lens, as illustrated. Place a screwdriver into one notch;
twist or pry the screwdriver to release the lens. Repeat for
the second notch on the opposite side.
Rotate the bulb socket forward. Push bulb in and turn to
remove. Secure new bulb into socket and rotate bulb socket
backward.
Replace the lens tabs into the top or the bottom of the hood
opening. Rotate lens to position and press down at notch
until the lens locks into position.
CAUTION: Use 25 watt replacement bulb, only.
Ask for GENUINE EUREKA replacement bulb, 40009A.
1
2
3
