Basic parameters
Hours setting
Press ‘SET’ until the minutes flash. Change using the ‘+’ and ‘-’ keys.
Press ‘SET’ a second time to change the flashing times using the ‘+’ and ‘-’
keys.
If you are done, you will return automatically to the first screen.
Set the day of the week
Press ‘SET’ a third time to set the day of the week using the ‘+’ and ‘-’ keys: 1 for
Monday to 7 for Saturday).
Define the setpoint temperature
The setpoint temperature of the thermostat is the reference temperature defined by
the factory as default for each mode.
Continue pressing ‘SET’ to change each of the setpoint values always
using the ‘+’ and ‘-’ keys for each of the modes:
COMFORT (default setting : 21°C)
ECONOMY (default
setting:
17°C)
HOLIDAY (vacances)
(default setting : 5°C)
Advice :
press
to exit SET programm at any time.
Important :
Your thermostat works only if MENu 8 is in APP mode, not in FP mode
(see page 24).
The data registered in the programm are kept in memory during around 1 minute
in case of battery change. Basic settings ( day, hour) are not kept in memory and
will have to be set up again after the batteries have been changed.
13
