MENU 1 : Temperature sensor calibration
If the temperature indicated on the thermostat do not correspond to the room real
temperature, it is possible to adjust the display :
Just like in the pairing steps, press
until the screen shuts down, release and
press again until the screen lights up : you are in menu 1.
Correct the temperature value using + and - then confirm by pressing
3
seconds until the screen shuts down.
Press
to come back to the first screen.
MENU 5 et 6 : Opening detection
To ensure energy savings, it is important to avoid wasting it. The thermostat includes
a function allowing to detect an opening ( window, door )in case of airing the room
it is located in by stopping the heating order of the column. When the opening is
closed, or after a maximum period of time of 15 minutes, the thermostat goes back
to the programmated automatic set up.
20
The thermostat detect a quick
temperature decreasing
IF
THEN
The thermostat reduce the
temperature set up
