background image

3

Safety

SAVE THESE INSTRUCTIONS

WARNING: WHEN USING THIS UNIT, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS

1.  READ AND FOLLOW ALL INSTRUCTIONS
2.  WARNING: Risk of accidental injury or drowning: Children or handicapped persons should not use pedicure spa without 

adult supervision.

3.  WARNING: To avoid injury, exercise care when using a pedicure spa.
4.  WARNING: Risk of electric shock: Do not permit electric appliances (such as a hair dryer, lamp, telephone, radio, or 

television) to be within 5 ft (1.5 m) of this unit.

5.  DANGER: RISK OF ELECTRIC SHOCK: This unit should be grounded. Connect only to a dedicated 15 amp circuit that is 

protected by a Ground Fault Circuit Interrupter (GFCI). A GFCI should be provided by the electrician and should be 
tested on a routine basis. To test the GFCI, push the test button. The GFCI should interrupt power. Push the reset button. 
Power should be restored. If the GFCI fails to operate in this manner, there is a possibility of a ground fault, or defective 
GFCI. DO NOT USE THE UNIT. Have the problem corrected by a qualified service representative or an electrician before 
using.

6.  WARNING: Use the Pipeless™ Pedicure Bath only for its intended purpose: a fill and drain indoor appliance for foot and 

ankle hydromassage. DO NOT use attachments not recommended by manufacturer.

7.  RISK OF ELECTRIC SHOCK: Disconnect from the electrical supply before servicing.

WARNING

1.  DO NOT reach for any electrical object that has fallen into water. Unplug immediately.
2.  DO NOT drop or insert anything into any jet opening.
3.  DO NOT operate this unit without the complete jet assembly installed or without water filled 1 in (3 cm) above the jets .
4.  DO NOT overfill the basin.
5.  DO NOT stand on or in the basin, or on the foot rest.
6.  DO NOT leave this appliance unattended when in operation.
7.  Keep the electrical cord away from heated surfaces.
8.  Connect this appliance only to a properly grounded outlet (See Grounding Instructions on Page 4).
9.  To avoid injury, exercise care when entering or exiting the pedicure spa.
10.  It is important that you clean and disinfect the jets and basin after every use. Unless thoroughly cleaned after each use, 

bath residue will buildup within the jets and on the surface area of any whirlpool pedicure spa, which can promote the 
growth of infectious bacteria.

11.  Hydromassage should be pleasant and comfortable. Should you experience any pain or discomfort while using the 

pedicure spa, discontinue use immediately and consult your physician.

12.  Consult your physician if you are diabetic, have poor circulation, or if any area of your feet or legs is inflamed, has an 

open wound or if you have any other questions about whether you should be using hydromassage equipment.

13.  SANIJET recommends a qualified plumber and electrician install your Pipeless™ Pedicure Bath.
14.  Water supply temperature to the Pipeless™ Pedicure Bath MUST NOT exceed 106° F (41° C). Water temperature in excess 

of 106° F (41° C) may be injurious to users health. Check water temperature and adjust prior to use.

INSTALLER / OWNER BEARS ALL RESPONSIBILITIES TO COMPLY WITH ALL STATE AND LOCAL CODES WHEN

INSTALLING THIS PRODUCT. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY VOID WARRANTY.

Содержание PIPELESS SFB2-S115-XX

















Отзывы: