Sangean TOUGHBOX, Инструкция по эксплуатации

Страница: 6 / 12

5
Power the radio
1. Installing the batteries, first turn battery cover fixture
anti-clockwise to loosen and pull down the battery cover.
Note:
Before you insert the batteries, if you use non-rechargeable
batteries, make sure the Charger/Batteries switch which located
inside the battery compartment is switched to Batteries position.
If you use rechargeable batteries, make sure to switch
Charger/Batteries switch to Charger position.
2. Insert 4 X C size ( UM-2 ) battery into the compartment.
Ensure the battery is inserted in accordance with the
diagram shown.
Close the battery cover and fasten the fixture by turning clockwise.
If the radio is not to be used for any extended period of time,
it is recommended that the battery is removed from the radio.
Reduced power, distortion and a “ stuttering sound “ or low battery
sign is flashing on the display are all signs that the batteries
need replacing or recharged. ( see below charge the batteries )