08
GB
F
E
NL
D
When the alarm sounds
To cancel a sounding alarm, press the Power button.
When the buzzer alarm activates, the buzzer alarm symbol will flash on the display. The alarm will start softly and
gradually increase in level (Humane Wake System). It will sound for 1 minute and silence for 1 minute in repetition for
60 minutes unless cancelled.
When the radio alarm is activated, the alarm will go off in Humane Waking System and the radio alarm symbol will
flash on the display for 60 minutes.
Disabling / cancelling alarm setting
To cancel the radio / buzzer alarm setting before the alarm sounds, press the radio / buzzer alarm button. The display
will show “OFF”. The radio / buzzer alarm symbol will disappear from the display.
Snooze function
When the radio alarm sounds, pressing any button other than the Volume buttons and Power button will silence the
alarm for 5 minutes. When the buzzer alarm sounds, the buzzer alarm can be silenced for 5 minutes by pressing any
button other than the Power button. The display will show the snooze symbol
and “Z” will flash on the display. To
cancel the Snooze timer while the alarm is suspended, press the Power button to cancel the alarm.
Sleep function
The sleep timer will automatically switch off the radio after a preset time has elapsed.
1.
Press and hold the Power button until the radio beeps. Keep long pressing the Power button and the display will
cycle through the available options of 60-45-30-15-120-90-60 minutes.
2.
Release the Power button when the required sleep time appears on the display. The Sleep symbol
will show
on the display.
3.
To cancel the sleep function, press the Power button. The Sleep symbol will disappear and the radio is switched
off.
Software version / Setting the time format / tuning step
Software version
The software display cannot be altered and is just for your reference.
1.
Press the Power button to turn off the radio.
2.
Press and hold the Source button until the radio beeps. Software version number (e.g. Pxx) is shown on the
display.
Setting the time format / tuning step
1.
After the software version is shown on the display, keep long pressing the Source button until the time format (e.g.
24H) is shown the display. Rotate the Tuning control knob to select “12H” or “24H”.
2.
Press the select button to confirm the time format setting and enter the AM tuning step setting.
3.
Rotate the Tuning control knob to select “10” or “9” kHz. Press the select button to confirm the AM tuning step
setting and enter the FM tuning step setting.
4.
Rotate the Tuning control knob to select “100”, “200” or “50” kHz. Press the select button to confirm the FM tuning
step setting.
Содержание PR-D12BT
Страница 1: ...PR D12BT Version 1 GB...
