Sangean PR-D12BT, Руководство пользователя

Страница: 6 / 12

05
GB
F
E
NL
D
3.
Make sure all batteries are inserted with correct polarity as shown in the battery compartment. Replace the battery
cover.
When using alkaline batteries the battery switch must be placed in the alkaline
position. Failure to do so could result in serious damage to the batteries or radio.
IMPORTANT
4.
Reduced power, distortion, “stuttering sound” and the symbol “E” flashing or empty battery icon flashing on the
display are all signs that the batteries need replacing.
5.
If the radio is not to be used for an extended period of time, it is recommended that the batteries are removed
from the radio.
● If extended listening using batteries is anticipated, then the use of rechargeable batteries is recommended.
Charging the batteries
When using rechargeable batteries the battery switch must be placed in the NiMH
position. Batteries will only be charged when the radio is switched off and connected
to the AC adaptor.
IMPORTANT
The charge indicator will flash red indicating that batteries are charging. Batteries will be fully charged in around 4-6
hours depending on their capacity. The charge indicator shows a steady red light when battery charging is complete.
Duration for charging your batteries fully can vary according to the mAh capacity of
the batteries. Higher mAh batteries require a longer charging time.
During the charging process, if a battery is detected as faulty / damaged, the display
will show the battery error icon with the corresponding battery number. will flash
on the display.
NOTE
Using the AC power adaptor
The AC power adaptor included with this unit is 9 volts DC at 0.7A center pin positive.
Insert the adaptor plug into the DC socket on the left side of the radio. Plug the adaptor into a standard AC outlet.
Whenever the adaptor is used, the batteries are automatically disconnected. The AC adaptor should be disconnected
from the main supply when not in use.
The AC adaptor is used as the means of connecting the radio to the power supply. The AC Adapter used for the
radio must remain accessible during normal use in order to disconnect the radio from the power supply completely.
IMPORTANT