Sangean PR-D12BT, Руководство пользователя

Страница: 11 / 12

10
GB
F
E
NL
D
Reconnecting a previously – paired Bluetooth source device
The PR-D12BT can memorize up to 8 sets of paired Bluetooth source devices, when the memory exceed this
amount, the earliest paring device will be over written from the device.
If your Bluetooth source device already paired with the PR-D12BT previously, the unit will memorize your Bluetooth
source device and it attempts to reconnect with a Bluetooth source device in memorywhich is last connected. If the
last connected Bluetooth source device is not available, the PR-D12BT will try to connect to the second last Bluetooth
source device.
Disconnecting your Bluetooth device
1.
Press and hold the Bluetooth pairing button for 2-3 seconds to disconnect with your Bluetooth device or turn off
Bluetooth on your Bluetooth source device to disable the connection. There will be a confirmation tone sound and
the Bluetooth LED indicator on the radio will flash a fast blue to show the radio is discoverable again for pairing.
2.
You can also press the Source button to select any mode other than Bluetooth mode to disable the connection.
Factory reset
If you wish to completely reset your radio to its initial state this may be performed by the following procedure. By
performing a factory reset, all user entered settings will be erased.
1.
Turn off the radio.
2.
Press and hold Preset 3 button and the Source button at the same time, the “dEF” will appear and flash on the
display. Continue holding down these two buttons until all the icons appear on the screen. Now the factory reset is
completed.
Headphone socket
A standard 3.5mm headphone socket located on the left side of your radio is provided for use with headphones.
Inserting earbuds or headphones will automatically mute the internal speaker.
Please be aware that the sensitivity of headphones can vary widely. We therefore recommend setting the volume to a
low level before connecting headphones to the radio.
1.
Excessive sound pressure from Earbuds or Headphones can cause hearing loss.
2.
To prevent possible hearing damage, do not listen at high volume levels for long periods of time.
IMPORTANT