S&T Kontron COMe-bTL6 Скачать руководство пользователя страница 76

Страница: 76 / 101

COMe-bTL6 - User Guide. Rev. 1.5

www.kontron.com

// 76

Sub-Screen

Function

Second level Sub-Screen/Description

BCLK
Configuration>

BCLK RFI Frequency
SAGV High

Frequency in 10 KHz increments (range: 0 MHz to 98-100 MHz)
0

BCLK RFI Frequency
SAGV Max

Frequency in 10 KHz increments (range: 0 MHz to 98-100 MHz)
0

BCLK Spread

When enabled BCKL frequency runs at a non-configurable fixed
spread percentage.
[Enabled, Disabled]

Intel® Time
Coordinated
Computing>

#AC Split Lock

Enable: asserts #AC when atomic operation has operand crossing
two cache lines
[Enabled, Disabled]

IFU State

Enable: instructions prefetch to the cache
[Enabled, Disabled]

Software SRAM

Enable: allocated one way of LLC. If cache configuration sub-region
is available, it allocates based on sub-region.
Enabled, Disabled]

Data Streams Optimizer

Enable: utilizes DSO sub-region to tune system.
[Enabled, Disabled]

Error Log

Enable: logs errors related to Intel® TCC and saves to memory.
[Enabled, Disabled]

Intel® TCC
Authentication Menu>

Intel® TCC
Authentication

Determines key to be used, non-OEM
enrolled key can be added by user.
[Disabled, Non-OEM Enrolled Key, OEM
Enrolled Key]

Intel® TCC Mode

Enable modifies setting to improve real-time performance.
[Enabled, Disabled]

Intel® TCC Mode Affected Settings
IO Fabric Low Latency

Turns of some power management in PCH IO fabrics. S3 state is
not supported.
[Enabled, Disabled]

GT CLOS

Enable reduces Gfx LCC allocation to minimize impact of Gfx
workload on LLC.
[Enabled, Disabled]

OPIO Recentering

Improves PCIe latency.
[Enabled, Disabled]

C States>

Enabling allows CPU to enter c states when it is no 100% utilized.
[Enabled, Disabled]

Intel® Speed Shift
Technology>

Enabling exposes CPPC V2 interface to allow for hardware
controlled P-states.
[Enabled, Disabled]

Intel® SpeedStep ™>

Enabling exposes CPPC V2 interface to allow for hardware
controlled P-states.
[Enabled, Disabled]

Hyper-Threading>

Enables or disables the Hyper-Threading Technology.
[Enabled, Disabled]

ACPI D3Cold Support>

ACPI D3Cold support to be executed on D3 entry and exit.
[Enabled, Disabled]

Содержание Kontron COMe-bTL6






































































































Результаты поиска

Содержание Kontron COMe-bTL6

Отзывы:

S&T Kontron COMe-bTL6, Руководство пользователя, Страница: 76 / 101

Результаты поиска

Содержание Kontron COMe-bTL6

Отзывы: