S&T Kontron COMe-bTL6 Скачать руководство пользователя страница 67 | Manualshive

Страница: 67 / 101

S&T Kontron COMe-bTL6 Скачать руководство пользователя страница 67

COMe-bTL6 - User Guide. Rev. 1.5

www.kontron.com

// 67

Sub-screen

Description

<ESC>

<ESC> key exits a major Setup menu and enters the Exit Setup menu. Pressing the
<ESC> key in a sub-menu displays the next higher menu level

<RETURN>

<RETURN> key executes a command or selects a submenu

The currently active menu and the currently active uEFI BIOS Setup item are highlighted in white. Use the left and right
arrow keys to select the Setup menu.

Each Setup menu provides two main frames. The left frame displays all available functions and configurable
functions are displayed in blue. Functions displayed in grey provide information about the status or the operational
configuration.

6.3.

Getting Help

The right frame displays a help window. The help window provides an explanation of the respective function.

6.4.

Setup Menus

The Setup utility features a selection bar at the top of the screen that lists the menus.

Figure 12: Setup Menu Selection Bar

The Setup menus available for the COMe-bTL6 are:



Main



Advanced



Chipset



Security



Boot



Save & Exit

The currently active menu is highlighted in grey and the currently active uEFI BIOS Setup item is highlighted in white.
Use the left and right arrow keys to select the Setup menu.

Each Setup menu provides two main frames. The left frame displays all available functions. Configurable functions
are displayed in blue. Functions displayed in grey provide information about the status or the operational
configuration.

The BIOS version covered in this document may not be the latest version. The latest version
may have differences to the BIOS options and features described in this chapter.

«
...
65
66
67
68
69
...
»

Содержание Kontron COMe-bTL6






































































































Отзывы:

Нет отзывов