KBox C-103-NGSF - User Guide, Rev. Proof of Concept
www.kontron.com
// 47
5.2.4.
Installing/Removing an M.2 Module
To install an M.2 module please proceed according to the steps described:
1.
Close all applications; shut down the system properly and disconnect the connection
to the power source.
Disconnect all peripherals.
2.
Open the device as described in the subsection 5.2 “Opening and Closing the KBox C-
103-NGSF” (step 1-6).
3.
Locate the M.2 sockets and the corresponding fixing bolts. (Figure 27, pos. 4 and
5).
4.
Mount the fixing bolts at the correct position for the length of the M.2 card, using
the threaded holes (Figure 27, pos. 4)
5.
Insert the M.2 card into the corresponding socket (Figure 27, pos. 7) at an angle of
approx. 45° and push it down until it lies on the the fixing clip.
6.
Secure the M.2 on the fixing bolt with the corresponding fixing screw.
7.
In order to close the KBox C-103-NGSF, proceed in reverse order (step 6 to 1 of the
section 5.2 “Opening and Closing the KBox C-103-NGSF”.
To remove an M.2 module, please proceed according to the steps described:
1.
Close all applications; shut down the system properly and disconnect the connection
to the power source.
Disconnect all peripherals.
2.
Open the device as described in the subsection 5.2 “Opening and Closing the KBox C-
103-NGSF” (step 1-6).
3.
Locate the M.2 card installed into your system.
4.
Remove the fixing screw in order to release the M.2 card. It will spring up at an
angle of approx. 45° on the fixing clips side.
5.
Gently pull the M.2 card out.
6.
In order to close the KBox C-103-NGSF, proceed in reverse order (step 6 to 1 of the
section 5.2 “Opening and Closing the KBox C-103-NGSF”).
See also section 7.1 ”Specifications of the internal M.2 Connectors”.
Preventive Maintenance for M.2 SSDs:
Because of the
limited predetermined lifespan of SSDs, we recommend to
check the condition of your installed SSD drives via S.M.A.R.T.
regularly.
Pay attention to the manufacturer specifications for lifespan.
Содержание KBOX C-103-NGSF
Страница 7: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 7 ...
Страница 17: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 17 ...
Страница 28: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 28 3 3 1 X101 X201 Power Input Connectors ...
Страница 77: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 77 ...
