![S&T KBOX C-103-NGSF Скачать руководство пользователя страница 19](http://html.mh-extra.com/html/sandt/kbox-c-103-ngsf/kbox-c-103-ngsf_user-manual_793777019.webp)
KBox C-103-NGSF - User Guide, Rev. Proof of Concept
www.kontron.com
// 19
1.1.
Electrostatic Discharge (ESD)
A sudden discharge of electrostatic electricity can destroy static-
sensitive devices or micro-circuitry.
Therefore proper packaging and grounding techniques are necessary precautions to prevent
damage. Always take the following precautions:
1.
Transport boards in ESD-safe containers such as boxes or bags.
2.
Keep electrostatic sensitive parts in their containers until they arrive at the ESD-
safe workplace.
3.
Always be properly grounded when touching a sensitive board, component, or assembly.
4.
Store electrostatic-sensitive boards in protective packaging or on antistatic mats.
1.1.1.
Grounding Methods
By adhering to the guidelines below, electrostatic damage to the device can be avoided:
1.
Cover workstations with approved antistatic material. Always wear a wrist strap
connected to workplace. Always use properly grounded tools and equipment.
2.
Use antistatic mats, heel straps, or air ionizers for more protection.
3.
Always handle electrostatically sensitive components by their edge or by their
casing.
4.
Avoid contact with pins, leads, or circuitry.
5.
Turn off power and input signals before inserting and removing connectors or
connecting test equipment.
6.
Keep work area free of non-conductive materials such as ordinary plastic assembly
aids and Styrofoam.
7.
Use only field service tools which are conductive, such as cutters, screwdrivers,
and vacuum cleaners.
8.
Always place drives and boards PCB-assembly-side down on the foam.
1.2.
Instructions for the optional Lithium Battery
If ordered, your KBox C-103-NGSF is equipped with an optional lithium battery. For the
replacement of this battery please observe the instructions described in section 0 “
Optional RTC Lithium Battery (internally-accessible)”.
Danger of explosion when replacing with wrong type of battery. Replace
only with the same or equivalent type recommended by the manufacturer.
The lithium battery type must be UL recognized.
Do not dispose of lithium batteries in general trash collection.
Dispose of the battery according to the local regulations dealing with
the disposal of these special materials, (e.g. to the collecting
points for dispose of batteries).
Содержание KBOX C-103-NGSF
Страница 7: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 7 ...
Страница 17: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 17 ...
Страница 28: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 28 3 3 1 X101 X201 Power Input Connectors ...
Страница 77: ...KBox C 103 NGSF User Guide Rev Proof of Concept www kontron com 77 ...