Sandstrom S66IDAB10E, Инструкция по эксплуатации

Страница: 17 / 104

GB
Software Version
1. Press and hold the INFO button for 2 seconds and then release it to view the software
version of this unit.
2. The software version will automatically disappear after 5 seconds.
Auto Scan Modes
There are two types of scans, one is Quick scan and the other is Full scan .
•
Quick scan
:
Searches the stations between channels 8A and 13B.
To activate the quick scan press the
SCAN
button.
• Full scan :
Searches all DAB channels in the DAB Band III.
Press and hold the SCAN button for 2 seconds.
Secondary Services
You may see a “ > ” symbol after the name of the station, this indicates that there are secondary
services available to that station. These secondary services contain extra services that are
related to the primary station. e.g. a sports station may want to add extra commentaries. The
secondary services are inserted directly after the primary station in the station list.
To select the secondary station, press the button when the “
>
” appears in the display before
the station name. When the secondary service ends, the radio will automatically switch back to
the primary station.
Manual Tuning
As well as the auto tune function, you can manually tune the receiver. This can help you when
aligning your aerial or when adding stations that were missed while auto tuning.
1. Press and hold the
ENTER
button, the display will now show Manual tune.
2. Press the buttons to cycle through the DAB channels, which are numbered from 5A
to 13F.
3. After your desired channel number is selected, press the ENTER button to enter the
current multiplex, the top line will now display the first station in the multiplex.
4. Press the buttons to see what stations are present in the found multiplex.
5. Once you have reached the last station in the found multiplex, it will revert back to the
first station again. If you wish to exit the
Manual Tuning
mode, just press the
ENTER
button.
17
S66IDAB10E_IB_5L_110715.indb 17 15/07/2011 5:01 PM